3CH Channels ESC Servo Tester

Description

Features:

There are 3 modes to check servos or ESC:
Manual mode: turn the knob with different speed, check the reaction time;
Neutral mode: make the servo go back to the neutral point;
Automatic “window wiper” mode: make the servo swing like a window wipers in the biggest angle.
It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency and so on.
You can also connect 1-3 ESC to test and compare their reaction time respectively.
It can connect 3 servos of the CCPM helicopters and select servos.
It can also connect the servo of airplanes install the steering-box and adjust planes by using
With LED indicators.

৳ 210.00

Qty:  Add to Cart

Currently item(s) in cart.

Digital Metal Gear Servo

Description

Tower Pro MG995 Digital Metal Gear Servo for RC Car, Robot Servo 13 KG Torque.

Specification:

Dimension : 40mm x 19mm x 43mm

Original box: NO

Net weight: 69g

Package weight: 75g

Color: Black

Operating Speed : 0.17sec / 60 degrees (4.8V no load)

Operating Speed : 0.13sec / 60 degrees (6.0V no load)

Stall Torque : 13 kg-cm (180.5 oz-in) at 4.8V

Stall Torque : 15 kg-cm (208.3 oz-in) at 6V

Operation Voltage : 4.8 – 7.2Volts

Gear Type: All Metal Gears

Connector Wire: Heavy Duty, 11.81\\\” (300mm)

৳ 650.00

Qty:  Add to Cart

Currently item(s) in cart.

9g Micro servo

Description

Specifications:
Weight: 9g
Dimension: 23×12.2x29mm
Stall torque: 1.8kg/cm(4.8v)
Gear: Nylon gear set
Operating speed: 0.1sec/60degree(4.8v)
Operating voltage: 4.8v
Temperature range: 0℃_ 55℃
Dead band width: 1us
servo wire length: 25 cm

৳ 150.00

Qty:  Add to Cart

Currently item(s) in cart.

Carbon Fiber FPV Quadcopter Frame

Description

QAV250 Carbon Fiber Mini 250 FPV Quadcopter Frame(Unassembled)

Description
The Mini Quad is a low weight Mini Sport FPV Quadcopter frame.
It was designed to make use of standard sized electronic equipment commonly used in RC.
This allows the quadcopter to compete with larger quadcopters, while being smaller and agile !

Specifications

Materials: 3k Weave Carbon Fiber
Fasteners: Stainless Steel & Red Metal 8/8
Size: 220mm diagonally, 175mm wide, 130mm long motor-to-motor; about 1/2 the size of a regular quadcopter
Maximum Propeller: 5″
Motor Mount: M2 12mm – 16mm (Tiger MN1806 2300kv, RCX 1804 2400kv), M3 19mm (Tiger MT2206 2000kv, Sunnysky X2204 2300kv)
Flight Controller Mount: 30.5mm x 30.5mm
Board Camera Mount: 32mm x 32mm

৳ 1600.00

Qty:  Add to Cart

Currently item(s) in cart.

Quadcopter Frame

Description

The S500 is supplied with 2 x blue and 2 x black arms that are super ridged and have a carbon fibre rod through the center making for the strongest arms we have seen to date in this style of frame. The Blue and black arms make orientation much easier and there is no need for different colored props. The included landing gear has plenty of height making it suitable for GoPro type gimbals or similar. Another feature of the S500 is that when assembled the arms have a slight up sweep, this gives the Quad a dihedral effect which helps make it very stable, especially when descending from altitude.

Assembly of this frame is super simple with pre-threaded sleeves for all the frame bolts so no lock nuts are required. It utilizes one size bolts for the entire build which means you only want one size hex for the assembly. Another feature is the locating tabs for the arms which enables you to achieve the perfect alignment when building. The motor mounts are ready to take a selection of motors with mounting hole centers of 16, 19 and 25mm once again making this a very universal frame at a very affordable price.

৳ 2250.00

Qty:  Add to Cart

Currently item(s) in cart.

60W Hot Glue Gun

Description

Feature:
Hot Melt Glue Gun.
Great for artificial flowers, craft projects, furniture and wood working.
Power: 60W.
Voltage: 100-240V.
Frequency: 50-60Hz

For bonding jobs:
Toys and Models
Artificial Flowers
Decorations
Furniture
Woodworking
Cardboard and much more

৳ 450.00

Qty:  Add to Cart

Currently item(s) in cart.

ESC Program Card

Description

This program box is used to program the brushless ESC, it has friendly user interface and easy to use.

Specification
1. Size:  88mm*58mm*14mm
2. Weight:  40g.
3. Input Voltage:  4.8-6V
(If the ESC hasn’t built-in BEC, you need to use an additional battery to supply the program box).
Suitable for the following brushless airplane ESC:

৳ 850.00

Qty:  Add to Cart

Currently item(s) in cart.

Digital Hanging Weight Scale

Description

Features:
Small size and convenient for carrying
Buzzer alarm and zero reset when power on
Auto power off when idle time
Auto lock data when weighing finished. Press “TARE” for about 2 seconds to
turn on/off the locking function, press “ON/OFF” to unlock
UNIT: key for changing weight unit from kg-LB-Jin-OZ, 1kg=2Jin=2.2Lb=35OZt

৳ 500.00

Qty:  Add to Cart

Currently item(s) in cart.

Arduino Mega

UPDATED PRODUCT – Arduino Mega R3 Android Accessory Development Kit (ADK) Board [ATmega2560 ADK R3]. Fast track your Android phone hardware development or just design cell-phone robots with the Arduino ADK! The Arduino ADK is a microcontroller board based on the powerful ATmega2560 (datasheet). It has a USB host interface to connect with Android based phones, and a power supply boost converter to charge up the phone from DC power while its plugged into the ADK
We are now selling the R3 version which has pin-compatibility with the MEGA R3 – there is now an IOREF pin and the duplicated SCL/SDA pins next to the AREF pin.
The Mega ADK is compatible with all of Android’s Accessory Development Kit examples and also acts like the Arduino Mega you already love to use. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. Now its easy to connect any sort of sensor, LED, motor, etc to your Android based phones.
The ADK is based on the Mega 2560. For information on using the board with the Android OS, see (Google’s ADK documentation).
Check out all the Circuit Playground Episodes! Our new kid’s show and subscribe!Have an amazing project to share? Join the SHOW-AND-TELL every Wednesday night at 7:30pm ET on Google+ Hangouts.
Learn resistor values with Mho’s Resistance or get the best electronics calculator for engineers “Circuit Playground” – Adafruit’s Apps

৳ 69.00

Qty:  Add to Cart

Currently item(s) in cart.

Arduino Nano

ATMEGA328P-AU nano V3.0 R3 Board (Original chip).

• Microcontroller: ATmega328
• Operating Voltage (logic level): 5V.
• Input Voltage (recommended): 7-12V.
• Input Voltage (limits): 6-20V. 
• Digital I / O Pins: 14 (of which 6 provide PWM output).
• Analog Input Pins: 8
• DC Current per I / O Pin: 40mA.
• Flash Memory: 32KB (ATmega328) of which 2 KB used by bootloader.
• SRAM: 2KB (ATmega328)
• EEPROM: 1KB (ATmega328)
• Clock Speed: 16 MHz
• Dimensions: 43 x 18 x 19mm.
• Weight: 6g

৳ 250.00

Qty:  Add to Cart

Currently item(s) in cart.

Arduino Uno

Arduino Uno share the same components, characteristics and quality of manufacturing. They are actually the same board under a different brand. Depending on the area of the world where you live you’ll be able to purchase an Arduino Uno or a Genuino Uno. Learn more.

Technology
Uno Rev3 is a microcontroller board based on the ATmega328P, an 8-bit microcontroller with 32KB of Flash memory and 2KB of RAM. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno board is the first in a series of USB boards and it is the reference model for the Genuino platform; for an extensive list of current, past or outdated boards see the Comparison Page.

Documentation
The Uno is open-source hardware! These are the relevant files:
Schematics - Reference Design - Board size

If you want more information about programming the Genuino Uno or how to interface hardware with it, please go to the Product Page. Genuino Uno Rev3 is programmed, as all the other Genuino boards with theSoftware (IDE) that you can download for free. To find inspiration forwhat you can do with the Genuino Uno, please visit the Genuino.cc Tutorials Page or take part in the community the lively discussions on the Forum.

৳ 400.00

Qty:  Add to Cart

Currently item(s) in cart.

DC12V 400 Rpm Micro Metal Gear Motor

This is a DC Mini Metal Gear Motor,ideal for making robots .Light weight, high torque and low RPM. Fine craftsmanship,durable,not easy to wear. With excellent stall characteristics,can climb hills easily. You can also easily mount a wheel on the motor’s output shaft.
Features:
Small volume, torsion big,all metal gear, durable, not easy to wear.
Great replacement for the rusty or damaged DC geared speed reduce motor on the machine.
Widely used on Boat,Car,Electric Bicycle,Fan,Home Appliance.

৳ 280.00

Qty:  Add to Cart

Currently item(s) in cart.

12V DC 100 RPM High Torque Gear Motor

12V DC 100 RPM High Torque Gear-Box Electric Motor 5W Speed control.

100% brand new and high quality. 

It is great for speed control . Replacement your electrical and testing equipment a new lease of life . Benefiting from high torque and low noise . This motor is solidly constructed . 
This motor suitable for most of high torque applications . 

• Horse Power Cont.: 5W
• Voltage/current: 12V DC . 
• RPM: 100 . 
• Reversibility : Reversible . 
• Length of Motor (including spindle): 76.1mm 

৳ 1100.00

Qty:  Add to Cart

Currently item(s) in cart.

12V DC 30 RPM High Torque Gear Motor

12V DC 30 RPM High Torque Gear-Box Electric Motor 5W Speed control.

•     100% brand new and high quality.
      It is great for speed control .
      Replacement your electrical and testing equipment a new lease of life .
      Benefiting from high torque and low noise .
      This motor is solidly constructed .
      This motor suitable for most of high torque applications .
      Horse Power Cont.: 5W
      Voltage/current: 12V DC .
      RPM: 30 .
      Reversibility : Reversible .
      Length of Motor (including spindle): 76.1mm .

৳ 1000.00

Qty:  Add to Cart

Currently item(s) in cart.

DC-12V 1000RPM

12V 30mA 1000RPM 25mm Diameter Electric Mini DC Gear Motor Gearbox.

• Type: Gear Motor
• Torque: 0.1-.5kgf.cm
• Construction: Permanent Magnet
• Commutation: Brush
• Protect Feature: Totally Enclosed
• Speed(RPM): 1000rpm
• Continuous Current(A): customized
• Output Power: 0.1-3W
• Voltage(V): 3-12v
• Efficiency: IE 1

৳ 400.00

Qty:  Add to Cart

Currently item(s) in cart.

12V 1 Channel Red Color Relay Module

12V 1 Chanel Relay Module With Optical Coupling Isolation Support High And Low Level Trigger .

Introduction:

• 1, this module is in line with international safety standards, the control area and the load area have isolation tank;
• 2, the use of pine music authentic relay;
• 3, with power supply and relay indicator, pull off bright, bright;
• 4, signal input signal, the public side and often start will lead;
• 5, can be used as a microcontroller development board module, can be used as a home appliance control;
• 6, control the DC or AC signals, can control the 220V AC load;
• 7, there is a normally open and a normally closed contact;
• 8, blue KF301 terminal connected to the control line is more convenient.

৳ 69.00

Qty:  Add to Cart

Currently item(s) in cart.

1-8S Lipo Battery Voltage Tester

1-8S Lipo Battery Voltage Tester / Low Voltage Buzzer Alarm.This a great two in one tool that gives a loud alarm at low voltage and can quickly display battery voltage. Simply plug a 1-8s battery's balance connector into the voltage meter/buzzer. You will receive an instant readout of the total voltage and an individual reading of each cell.

৳ 220.00

Qty:  Add to Cart

Currently item(s) in cart.

XL6009 DC Boost ADJ Module

This is a high-performance switching current 4A boost (BOOST) module. The module uses the second generation of high-frequency switching technology XL6009E1 core chip, performance than the first generation technology LM2577. XL6009 boost module at a lower cost, superior performance.

1. Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V;

2. Wide output voltage 5V ~ 35V;

3. Built-4A efficient MOSFET switch, so that the efficiency up to 94%; (LM2577 current is only 3A)

4. Ultra-high switching frequency 400KHz, you can use a small-capacity filter capacitors that can achieve very good results, the ripple is smaller and smaller. (LM2577 frequency only 50KHz)

৳ 90.00

Qty:  Add to Cart

Currently item(s) in cart.

L298N Dual Motor Controller Module

L298N Dual Motor Controller Module 2A and Arduino.

In this tutorial we'll explain how to use our L298N H-bridge   Dual Motor Controller Module 2A with Arduino. This allows you to control the speed and direction of two DC motors, or control one bipolar stepper motor with ease. The L298N H-bridge module can be used with motors that have a voltage of between 5 and 35V DC. 

There is also an onboard 5V regulator, so if your supply voltage is up to 12V you can also source 5V from the board.

These L298 H-bridge dual motor controller modules  are inexpensive and available from the Tronixlabs Australia store. Furthermore if you're completely new to the world of Arduino we highly recommend you  review a copy of "Arduino Workshop", and if you have questions, ask in our customer forum. 

So let's get started!

First we'll run through the connections, then explain how to control DC motors then a stepper motor.

৳ 150.00

Qty:  Add to Cart

Currently item(s) in cart.

TEC1-12709 12 VDC 82 W Peltier

dit the product description here. If copy and paste text, use Remove Formatting for best display. Delete all the text here and below if not in use. Leave data table as-is or empty if no data to include. "Jump Break" line is included to prevent Blogger paging issues.

TEC will typically produce a maximum temperature difference of 30-40 C between its hot and cold sides. The more heat moved using a TEC, the less efficient it becomes, because the TEC needs to dissipate both the heat being moved, as well as the heat it generates itself from its own power consumption. The amount of heat that can be absorbed is proportional to the current and time.

W = Plt

where P is the Peltier Coefficient, I is the current, and t is the time. The Peltier Coefficient is dependent on temperature and the materials the TEC is made of.

৳ 260.00

Qty:  Add to Cart

Currently item(s) in cart.

HC-SR501PIR Motion Detector Module

HC-SR501 Human Sensor Module Pyroelectric Infrared.

• Product Type: HC--SR501 Body Sensor Module

• Operating voltage range: DC 4.5-20V

• Quiescent Current: <50uA

• Level output: High 3.3 V /Low 0V

• Trigger: L cannot be repeated trigger/H can be repeated trigger(Default repeated trigger)

৳ 70.00

Qty:  Add to Cart

Currently item(s) in cart.

HC-SR04 Ultrasonic Sonar Sensor

This is a low cost Ultrasonic Distance Sensor provides a non-contact distance measurement with a fine accuracy of 3mm. The module is capable of measuring distance from obstacles in range of 2 cm to 400 cm or 1 inch to 3 Ft. Unlike IR sensors, the performance of this sensor is no dependent on the sunlight or color of the object.

৳ 80.00

Qty:  Add to Cart

Currently item(s) in cart.

9 DOF IMU Sensor Module

This is the MPU-9250 is a 9-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and a Digital motion processor. Based on the IC MPU-9250, which is the world’s smallest 9-axis MotionTracking device and incorporates the latest InvenSense design innovations, this module features three 16-bit ADC for digitizing the gyroscope outputs and three 16-bit ADCs for digitizing the accelerometer outputs and three 16-bit ADCs for digitizing the magnetometer outputs. low power, and high performance make it suitable for consumer electronics equipment including smartphones, tablets and wearable sensors

Features

• Three 16-bit analog-to-digital converters ADCs for digitizing the gyroscope outputs
• Three 16-bit ADCs for digitizing the accelerometer outputs
• Three 16-bit ADCs for digitizing the magnetometer outputs
• Gyroscope full-scale range of -250, -500, -1000, and -2000°/sec  dps
• Accelerometer full-scale range of -2g, -4g, -8g, and -16g
• Magnetometer full-scale range of -4800μT
• I2C and SPI serial interfaces
• Internal Digital Motion Processing engine supports advanced MotionProcessing and low power functions such as gesture recognition using programmable interrupts
• Power supply: 3-5v

৳ 960.00

Qty:  Add to Cart

Currently item(s) in cart.

JST Male/Female Connector

Description

Suitable for using on most RC helicopter and plane
Great for small Lipo and NiMh connection.
Wire Length: 15 cm + 15 cm.
Color: Red + Black

৳ 15.00

Qty:  Add to Cart

Currently item(s) in cart.

30cm Servo Extension Lead

Description

30cm Male to Female Servo Extension Lead Wire Cable For Futaba JR RC Car Plane Connector.

Specifications:

1. Wire Gague: 26AWG
2. Wire Material: Tinned Copper with Silicon Cover
3. Weight: 4.4g/piece
7. cable length is 30cm long
8. Small and light.

৳ 30.00

Qty:  Add to Cart

Currently item(s) in cart.

XT-60 Connectors Male/Female

Description

Item Description:
Made of high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector.
The XT60 ensures a solid high-amp connection, perfect for applications up to and beyond 65A constant

Features:
1 Pair of high quality XT60 Male and Female power connectors.
Ensures high-amp connection.
Used in RC battery and motor.

৳ 50.00

Qty:  Add to Cart

Currently item(s) in cart.